From 676ca432b1373acf6d0f28ae2e4dfe6ca56f940e Mon Sep 17 00:00:00 2001 From: fanyx Date: Sat, 29 Jan 2022 13:11:54 +0100 Subject: [PATCH] Add Pulseaudio --- .config/pulse/default.pa | 140 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 .config/pulse/default.pa diff --git a/.config/pulse/default.pa b/.config/pulse/default.pa new file mode 100644 index 0000000..a9b0e57 --- /dev/null +++ b/.config/pulse/default.pa @@ -0,0 +1,140 @@ +#!/usr/bin/pulseaudio -nF +# +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +# This startup script is used only if PulseAudio is started per-user +# (i.e. not in system mode) + +.fail + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore +load-module module-card-restore + +### Automatically augment property information from .desktop files +### stored in /usr/share/application +load-module module-augment-properties + +### Should be after module-*-restore but before module-*-detect +load-module module-switch-on-port-available + +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) +#load-module module-alsa-sink +#load-module module-alsa-source device=hw:1,0 +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input +#load-module module-null-sink +#load-module module-pipe-sink + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect +.else +### Use the static hardware detection module (for systems that lack udev support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect channels=2 +.fail +.endif + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Network access (may be configured with paprefs, so leave this commented +### here if you plan to use paprefs) +#load-module module-esound-protocol-tcp +#load-module module-native-protocol-tcp +#load-module module-zeroconf-publish + +### Load the RTP receiver module (also configured via paprefs, see above) +#load-module module-rtp-recv + +### Load the RTP sender module (also configured via paprefs, see above) +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-rtp-send source=rtp.monitor + + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Honour intended role device property +load-module module-intended-roles + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### If autoexit on idle is enabled we want to make sure we only quit +### when no local session needs us anymore. +.ifexists module-console-kit.so +load-module module-console-kit +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif + +### Enable positioned event sounds +load-module module-position-event-sounds + +### Cork music/video streams when a phone stream is active +load-module module-role-cork + +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Make some devices default +#set-default-sink output +#set-default-source input + +### Remap Focusrite Scarlett Solo from Stereo to Mono +load-module module-remap-source source_name=alsa_input.usb-Focusrite_Scarlett_Solo_USB-00.analog-mono source_properties="device.description='Focusrite Scarlett Mono'" master=alsa_input.usb-Focusrite_Scarlett_Solo_USB-00.analog-stereo master_channel_map=front-left channel_map=mono +set-default-source alsa_input.usb-Focusrite_Scarlett_Solo_USB-00.analog-mono + +### Loopback AverMedia Capture Card to E30 Output +load-module module-loopback source=alsa_input.usb-AVerMedia_Technologies__Inc._Live_Gamer_Mini_1311572102339-03.analog-stereo sink=alsa_output.usb-Topping_E30-00.analog-stereo adjust_time=0 latency_msec=1 + +### Allow including a default.pa.d directory, which if present, can be used +### for additional configuration snippets. +.nofail +.include $HOME/.config/pulse/default.pa.d